Configuration & Calibration
53
5.6 Calibration Using Actual Tank Level
When calibrating using a handheld without a device
description, tank level must be moved. Calibration is a
two-step process. A low point calibration and high point
calibration are required. Calibration points do not have
to be an empty tank or a full tank. (example: low point
performed at 20% and high point performed at 80 % will
work). You also may perform high point cal before low
point cal.
From main screen go to:
1
Device setup
2
Diag/Service
3
Calibration
4
Enter values
You now have four choices:
1
PV LRV
2
PV URV
3
PV USL
4
PV LSL
Choose
PV LRV
if your vessel currently has a low level.
Choose
PV URV
if your vessel currently has a high level.
Edit the displayed value to equal the actual tank level,
then:
ENTER
SEND
OK
OK
⇐
1 Apply values
OK
You now have two choices:
1
4mA
2
20 mA
Choose
20mA
if performing a high point calibration.
Choose
4mA
if performing a low point calibration.
Continue: OK
ENTER
3 EXIT
OK
HOME
Observe on the home screen that your PV URV or PV
LRV value has been changed by the calibration procedure.
You must manually change these values back. Re-enter
your desired PV URV and PV LRV at this time.
This completes the first calibration point of the two-step
process. For the second point, change the level in your
tank and repeat the entire above procedure.
Summary of Contents for RCT 10 series
