RCT 10, 11, 12, 13 Series
34
Pop-up screens come from selections in the
FILE
pull
down at the top left of the PC menu Screen.
Copies are saved in both .slt file and .txt files.
The .slt file will download into a transmitter through the
OPEN
command. The text file may be printed out, or
reformatted.
command provides a pre-formatted hard copy.
3.14 Validation
More and more industries are requiring formal validation
of their processes for their customers as well as for
various government regulatory agencies. The RCT Series
Transmitter has this capability built in.
3.14.1 Validation Design Concept
Smart RF Continuous Level systems derive their input
information from a sensing element that provides
a capacitance value to the RF Transmitter. The RF
Transmitter output signal is derived from this capacitance
value, based on the capacitance span of the transmitter
during initial calibration.
If the RF Transmitter's minimum and maximum
capacitance values are known, and remain unchanged,
the effects of a specific capacitance value within this
range can be accurately predicted. If a known capacitance
(which can be NIST-traceable) within this range produces
repeatable results and the minimum and maximum
values remain unchanged the RF Level system can be
assumed to be operating correctly.
With a known capacitance input, the output signal
would not be repeatable if the calibration information is
altered, or if the RF transmitter was not operating within
specifications. Repeatable calibration information can be
maintained through the use of the Save/Print capability
built into the RCT Series Transmitter.
3.14.2 Validation Procedures
A. Drexelbrook Laptop software must be used.
Connect the laptop to the smart level transmitter
signal loop to be validated and start the software
according to the instructions provided at the
beginning of this
Section 3
.
B. At the Main configuration screen observe the
Level Calibration,
Lower Capacitance,
and
Upper Capacitance
values and the
Lower
Figure 3-18
Capacitance on Menu Screen
3.13 Save/Print Entries (Continued)
Summary of Contents for RCT 10 series
