RCT 10, 11, 12, 13 Series
54
5.7 Bench Calibration (if needed)
When performing a bench calibration tank level will be
simulated using a Drexelbrook 401-6-8 C-box. Calibration
is a two-step process. A low point calibration and high
point calibration are required
Hook up a Drexelbrook c-Box in place of the sensing
element. Dial up the capacitance value that corresponds
to an empty tank. For specific information on how to wire
and use the C-box calibrator see the instructions that
came with the calibrator.
From main screen go to:
1
Device setup
2
Diag/Service
3
Calibration
4
Enter values
You now have four choices
1
PV LRV
2
PV URV
3
PV USL
4
PV LSL
Choose
PV LRV
if performing a low point calibration.
Choose
PV URV
if performing a high point calibration.
Edit the displayed value to equal the actual tank
level,then:
ENTER
SEND
OK
OK
⇐
1 Apply values
OK
You now have two choices:
1
4mA
2
20mA
Choose
20mA
if performing a high point calibration.
Choose
4 mA
if performing a low point calibration.
Continue: OK
ENTER
3 EXIT
OK
HOME
Observe on the home screen that your PV URV or PV
LRV value has been changed by the calibration procedure.
You must manually change these values back. Re-enter
your desired PV URV and PV LRV at this time.
This completes the first calibration point of the two-step
process. Change the value on the C-box to correspond to
the Picofarads of a full tank and repeat the entire above
procedure for a high point calibration.
Summary of Contents for RCT 10 series
