ELECTONIC KEYS:
To arm and disarm the M43, when you insert the key in the receptacle (and extract it immediately):
- the disarming
of the system is signalised by 1 flash and 1 boop, while
- the arming
of the system is signalised by 1 flash and 1 beep.
MEMORIZATION OF NEW RADOCARD (MAX 4 PCS):
NB:
every time you need to memorize new radiocard it will be necessary to memorize again all the previous one; all the radiocard must be
accordingly prepared for this operation by the opening of the plastic case, taking away the battery , press the button for one second and
then re-introduce the battery.
The complete procedure is the following:
- introduce one key into the recepactle for 10 seconds with +15 off;
- the led will flash fastly and you will have one long beep from the buzzer;
- press the button of the first radiocard until when the led will be on fixed; when you release the button, the signal will be transmitted
and the confirmation of memorization is given by two beep and led fixed on for 10 seconds;
- after those 10 seconds, the led will start again to flash fastly that means that the control unit is ready to receive other radiocards and
for them it is necessary to repeat the previous procedure.
When you finalize to memorize the radiocard, you insert the key in the receptacle and you estract it immediately, so that the closing of
the memorizing procedure is given by the led turned off and 4 beeps of thebuzzer; then you can reactivate the m43 always with electronic
MEMORIZATION OF NEW ELECTRONIC KEY (MAX 4 PCS):
NOTE: every time that new keys are memorized, the M43 will erase the keys previously memorized with the exception of the key used
to enter into the procedure; it will be therefore necessary to memorize again all the previous keys available.
- introduce one key into the recepactle for 10 seconds with +15 on;
- the led will flash fastly and you will have one beep and one boop from the buzzer;
- insert a new key in the recepcacle and take away it immediately: the confirmation of memorization is given by two boop;
- insert the other keys with the same above previous procedure.
Once finalized the procedures of memorization of new radiocards and electronic keys, re-arm the product trough electronic key.
TECHNICAL FEATURES:
Power: ...................................................................................................................................................12 Vcc
Engine cut off: ....................................................................................................................................RL1-RL2-10A
ON
1
BEEP
+15
OFF
X 10 SEC.
SPEED FLASH
MEM=OK
SPEED
FLASH
LED OFF
+ 4 BEEP
EXIT
REPEAT THE SAME OPERATION FOR
ALL THE RADIOCARD TO BE
MEMORIZED
EXIT
REPEAT THE SAME OPERATION
FOR ALL THE RADIOCARD TO
BE MEMORIZED
+15
ON
X 10 SEC.
SPEED FLASH
MEM= 1 FLASH
SPEED FLASH
LED OFF
+ 4 BEEP
+15
OFF
Fig. 5
Fig. 6
NOTE: ONCE FINALIZED THE PROCEDURES OF MEMORIZATION OF NEW RADIOCARDS AND ELECTRONIC KEYS, RI-ARM
THE PRODUCT TROUGH ELECTRONIC KEY
BEEP - BEEP
BEEP - BOOP
BOOP - BOOP
