REV.01 - M43 AUTOMATIC IMMOBILIZER
JUMPER
(ANTI CAR-JACKING)
+15
OUT
1A
N
°
2
N
°
3
N
°
16
N
°
14
N
°
14
N
°
10
N
°
1
C
NA
NC
RELÉ N
°
1
C
NC
RELÉ N
°
2
N
°
4
N
°
5
N
°
6
N
°
7
N
°
9
ELECTRONIC KEY
FUNCTIONING DESCRIPTION:
The M43 is an engine cut off with automatic arming equipped with an automatic remote control and an emergenzy electronic key
This product can works also as anti car jacking system by the activation of the engine cut of relays and with the eventual activation of the horn of the vehicle
NB: for the correct functioning of the system, clearly the Radio Card (automatic remote control) must not be leaved on the vehicle but must always be
with the driver.
RADIO CARDS AND ELECTORNIC KEYS (OPT):
The M43 can support a maximum of 4 radiocards (P62405) and a maximum of 4 electronic keys trough the self-learning procedure (see relevant paragraph).
The radiocard transmit a random code and if they will transmit for a long time (ex. 4 days) far from the M43 control unit, they could loose the synchronization;
in order to synchronize them again with the control unit, press the button two/three times within 3 seconds near to the control unit.
AUXILIARY OUTPUT (AUX):
Normally the AUX output is expected to pilot and additional external relé for the engine cut off that is activated with the product armed and +15 on
Otherwise, if the M43 is used in modality anti car jacking, the output AUX is automatically settled in order to pilot the horn signal trought an external relé
(see pictures 3 and 4), horn that will be activated toghter with the blinker during the phases 3, 4 and 5 of the anti car jacking.
ENGINE CUT OFF
HORN (NEGATIVE COMMAND CONTROLLED BY THE IGNITION)
HORN (POSITIVE COMMAND CONTROLLED BY THE IGNITION)
Fig. 1
Fig. 2
+
Fig. 3
Fig. 4
87
30
86
85
87
30
86
85
87
30
86
85
N
°
10
STARTER
ENGINE
+50
INSTALL AN
ADDITIONAL
RELAY OF 30A
87
30
86
85
!
+30
+30
+30 o +15
HORN
N
°
10
+30 o +15
HORN
N
°
10
+30
ORIGINAL
HORN
COMMAND
INSTALL AN
ADDITIONAL RELAY
IF HORN IS
CONTROLLED BY
THE IGNITION
ORIGINAL
HORN
RELAY
+30
ORIGINAL
HORN
COMMAND
INSTALL AN
ADDITIONAL
RELAY
LED
