Metallkraft 3814001, Operating Instructions Manual

Page: 7 / 18

Intended use
SBM-Series | Version 2.02 7
3 Intended use
The bead bending machine SBM 110-08 and SBM 140-
12 is a manually operated bending machine. The ma
-
chine may only be used as described in this manual. The
bead bending machine is designed for beading and flan
-
ging up to a maximum sheet thickness of 0,8 and 1,2
mm. It may only be operated by persons who have been
trained and instructed in the use and maintenance of
bead bending machines.
Intended use also includes compliance with all informa
-
tion in these instructions. Any use beyond the intended
use or any other use is considered misuse. Any use of
the bead bending machine in other areas and for other
purposes is considered to be contrary to the intended
purpose. Stürmer Maschinen GmbH assumes no liability
for constructive and technical changes to the bead ben
-
ding machine. Claims of any kind due to damage due to
improper use are excluded.
3.1 Residual risks
Even if all safety regulations are observed and the ma
-
chine is used correctly, there are still residual risks,
which are listed below:
- There is a risk of injury to the upper limbs (e.g.
hands, fingers).
- Danger from falling workpieces.
3.2 Technical state
The design and construction of the machine comply with
the current state of the art and are built in accordance
with the recognized safety regulations. CE conformity
expressly refers only to the machine as delivered.
Please note the following:
1. The functionality of the protective covers and guards
must be ensured.
2. Any manipulation of protective covers and other safety
devices is prohibited.
3. Before each use, the machine should be checked for
externally visible damage.
4. In the event of safety-relevant deviations from the deli
-
very condition, the machine must be inspected and, if
necessary, repaired by an authorised specialist.
5. From the time when the machine no longer corre
-
sponds to the regular operating condition, the bead
bending machine must be taken out of operation until
it is repaired.
WARNING!
Risk of misuse!
Misuse of the bead bending machine can lead to dan
-
gerous situations.
- Only operate the bead bending machine in the po
-
wer range specified in the technical data.
- Never bypass or override the safety devices.
- Never work on other materials than specified in the
intended use.
- Only operate the bead bending machine in a techni
-
cally perfect condition.
WARNING!
Danger!
Unauthorized rebuilds or modifications, especially
those that affect the safety of the machine operator,
are strictly prohibited.
Technical modifications, rebuilds and extensions
made to the machine by the user may invalidate the
CE conformity of the machine and are the responsibi
-
lity of the operator.
ATTENTION!
The manufacturer reserves the right to make chan
-
ges to the characteristics of the product at any time
and without prior notice in the interests of technical
development or changing regulations.