Spare parts
SBM-Series | Version 2.02
15
12.5 Disposal via municipal collection points
Disposal of used electrical and electronic equipment (to
be used in the countries of the European Union and
other European countries with a separate collection sy
-
stem for this equipment)
The symbol on the product or its packaging
indicates that this product is not to be dispo
-
sed of as normal household waste, but must
be returned to a collection point for the recy
-
cling of electrical and electronic equipment.
By contributing to the correct disposal of this
product, you protect the environment and the health of
your fellow human beings. Environment and health are
endangered by incorrect disposal. Material recycling
helps to reduce the consumption of raw materials. For
more information about recycling this product, contact
your local community, municipal waste management
company or the store where you purchased the product.
13 Spare parts
13.1 Spare parts order
The spare parts can be obtained from the dealer or di
-
rectly from the manufacturer. The contact details are in
chapter 1.2 Customer Service.
Specify the following key data for inquiries or when orde
-
ring spare parts:
- machine type
- item number
- position number
- construction year
- amount
- desired shipping method (post, freight, sea, air, ex
-
press)
- delivery address
Spare parts orders without above given information can
not be considered. If the shipping method is missing,
shipping will be at the discretion of the supplier.
Information on the machine type, article number and
year of manufacture can be found on the nameplate,
which is attached to the machine.
Example
The Crank handle for the Bead Bending Machine SBM
110-08 must be ordered. The Crank handle has the num
-
ber 36 in the spare parts drawing 1.
By ordering spare parts, send a copy of the spare parts
drawing (1) with the marked part (Crank handle) and
marked positon number (36) to the dealer or spare parts
department and provide the following information:
- Type of machine: Bead Bending Machine
SBM 110-08
- Item number: 3814001
- Drawing number: 1
- Position number: 36
The item number of your machine:
Bead Bending Machine SBM 140-12:
3814002
Bead Bending Machine SBM 110-08:
3814001
DANGER!
Risk of injury by using wrong spare
parts!
Dangers may result for the user and damages as well
as malfunctions may be caused by using wrong or
damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.
NOTE!
Loss of warranty!
The manufacturer's warranty will become null and
void if non admitted spare parts are being used.
Summary of Contents for 3814001
Page 18: ...www metallkraft de ...
