background image

metAl FusIon, Inc.

lImIted one-yeAr wArrAnty

whAt thIs wArrAnty coVers

This  warranty  covers  all  components  of  this  outdoor  cooker  to  be  free  from  defects  in  materials  and 
workmanship, with the exceptions stated below.

how long coVerAge lAsts

This warranty runs for one year from the date of purchase. Please keep your receipt with this manual for future 
reference.

whAt Is not coVered

This warranty does not cover the following:

incidental and consequential Damages.

 This warranty does 

not

 cover incidental and consequential 

damages arising in any way out of the use of this outdoor cooker. The liability of Metal Fusion, Inc. is, in 
any event, limited to the amount of the original purchase price of this outdoor cooker, and  remains in 
force only as long as the product remains in its original, as-built configuration. Some states do not allow 
the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may 
not apply to you.

neglectful operation.

 This warranty does 

not

 cover any loss or damage arising in any way due to 

the negligent operation of this outdoor cooker.

altered, Repaired or Misused equipment.

 This warranty does 

not

 cover any loss or damage arising 

in  any  way  out  of  the  use  of  this  outdoor  cooker  when  it  has  been  altered,  repaired  by  persons  other 
than Metal Fusion, Inc., or when it has been abused or misused, or when it has been used other than in 
accordance with the manufacturer’s operating instructions, including, without limitation, any damage to the 
consumer’s pots because they were placed on a lit cooker while the pot is empty.

other assumed Responsibilities.

 Unless otherwise provided by law, this warranty does 

not

 cover 

any responsibility or liability arising in any way out of the use of this product where that responsibility or 
liability was purportedly assumed by any other person or agent.

Paint, Discoloration, and Rust. 

This warranty does 

not

 cover the paint on the outdoor cooker, as in 

a normal use of the outdoor cooker, the paint will be burned off. nor does this warranty cover discoloration 
or rust to the cooker as these occurrences are part of the cooker’s normal wear and tear.

whAt metAl FusIon, Inc. wIll do

Metal  Fusion,  Inc.  will  repair  or  replace  any  outdoor  cooker  that  proves  to  be  defective  in  materials  or 
workmanship. In the event repair is not possible or economically feasible, Metal Fusion, Inc. will  replace your 
outdoor cooker with an identical or substantially equivalent outdoor cooker. Metal Fusion, Inc. will perform 
this service at no charge to you, except for the actual cost of shipping and handling the outdoor cooker or 
replacement parts.

how to get serVIce

In the event you have a problem or malfunction with your outdoor cooker, simply call Metal Fusion, Inc. at 
(800) 783-3885.

how stAte lAw ApplIes

This warranty gives you specific rights, and you may have other rights which vary from state to state.

6

Summary of Contents for 90SPK



















Reviews: