background image

for your safety

If you smell gas:

1.  shut off gas to the appliance.

2.  extinguish any open flame.

3.  If odor continues, keep away from the appliance and immediately 

call your Fire department.

FAIlure to Follow these InstructIons could result In FIre or explosIon 

whIch could cAuse property dAmAge, personAl Injury or deAth.

1.  never operate this appliance unattended.

2.  never operate this appliance within 10 feet (3.05m) of any structure, 

combustible  material  or  other  gas  cylinder.  do  not  locate  this 

appliance under Any overhead construction.

3.  only use propane burning units outdoors. risks include fire and 

carbon  monoxide  fumes.  lack  of  ventilation  can  cause  injury  or 

death.

4.  never operate this appliance within 25 feet (7.5m) of any flammable 

liquids or vapors.

5.  do  not  fill  cooking  vessel  beyond  maximum  fill  line  (if 

applicable).

6.  when  cooking  with  oil/grease,  always  use  the  thermometer 

provided  and  never  allow  the  oil/grease  to  get  hotter  than  350°F 

(177°c). If the temperature exceeds 350°F (177°c) or if oil begins 

to smoke, immediately turn the burner or gas supply oFF.

7.  heated  liquids  and  equipment  remain  at  scalding  temperatures 

long  after  the  cooking  process.  never  touch  cooking  appliance 

until liquids have cooled to 100°F (38°c) or less.

8.  If a fire should occur, keep away from the appliance and immediately 

call  your  Fire  department.  do  not  attempt  to  extinguish  an  oil/

grease fire with water. when cooking, have a type bc or Abc fire 

extinguisher readily available. A type bc or Abc fire extinguisher 

may, in some circumstances, contain the fire.

2

FAIlure to Follow these InstructIons And wArnIngs could result In FIre, 

explosIon, burn hAzArd or cArbon monoxIde poIsonIng 

whIch could cAuse property dAmAge, 

personAl Injury or deAth.

dAnger

dAnger

Summary of Contents for 90SPK



















Reviews: