16
9090 AdjustAble lId support system InstructIons
Your cooker includes an adjustable rod system that can be used to support the pot’s lid when opened.
Food contents within the pot’s basket can be emptied onto the lid when supported by the support rod
system and then distributed into food trays or containers. The rod system can be adjusted so that the
lid when opened and resting on the lid support rod will either be in an “angled” or “straight” position.
cAutIon: when removing food from the appliance, care shall be taken to avoid burns from hot cooking
liquids and food. this appliance and pot, including handles and lids, gets dangerously hot in
use. use well-insulated pot holders or oven mitts for protection from hot surfaces or splatter
from cooking liquids. safety goggles are also recommended to protect you from liquid splatter.
AlwAys
set the adjustable lid support system to the desired position before lighting or using the
cooker.
See following illustrations for pictures of the adjustable lid support system in its’ storage, angled and
straight orientation. The lid support system consists of an “upper” bar that is connected to the
cooker frame and remains staitionary, a “center” bar and a “lower” bar which rotates into position to
form a lid support. After reading the following lid support system position instructions, go to the
use
and care section
of this manual for further instructions.
storAge posItIon
The adjustable lid support system should be in the storage position when removed from
the packaging. After use of lid support system in angled or straight positions, rotate “lower”
bar up and “center” bar down. Insert the two rods located between the “center” and “lower”
bars into the clamps as shown in
Figure 1
above to return to the storage position.
clAmps
“lower” bAr
FIgure 1
“center” bAr
“upper” bAr
