17
Angled lId posItIon
To install the adjustable lid support system in the angled position, remove the rods from the clamps.
Rotate the “lower” bar downward and the “center” bar upward. Place the “lower” bar onto lower set of
tabs (2) which are attached to the cooker frame as shown in
Figure
2
and
Figure 3
above.
FIgure 2
FIgure 3
lower
tAb
lower tAb
strAIght lId posItIon
To install the adjustable lid support system in the straight position, remove the rods from the clamps.
Rotate the “lower” bar downward and the “center” bar upward. Place the “lower” bar onto upper set of
tabs (2) which are attached to the cooker frame as shown in
Figure
4
and
Figure 5
above.
FIgure 4
FIgure 5
upper
tAb
FAIlure to Follow these InstructIons And wArnIngs could result In
FIre, explosIon, burn hAzArd or cArbon monoxIde poIsonIng whIch
could cAuse property dAmAge, personAl Injury or deAth.
“lower”
bAr
“center”
bAr
lower
tAb
“lower”
bAr
“center”
bAr
upper
tAb
upper
tAb
