27
6.4. Unloading
The load body can be unloaded manually, with mechanical equipment or by tipping the box
with the hydraulic mechanism.
Unload by tipping the load body by following these actions in the order presented below:
• align the tractor with the trailer's axis;
• engage the tractor's parking brake;
• remove the safety pin that couples the load body with the chassis frame (fig. 5):
a) unloading to the back – the pins (fig. 5) must remain in the rear bells of the load body;
b) unloading to the left – the pins must be installed in the left hand bells;
c) unloading to the right – the pins must be installed in the right hand bells;
• make sure that the pins on the side to which the trailer is to be unloaded have been properly
installed;
• open the body wall locks on the unloading side;
• tip the load body by operating the hydraulic actuator;
• after the load has been discharged, lower the body and secure the wall(s) with the locks.
INFORMATION!
•
If it is necessary to unload the trailer on a slope, it is allowed to tip
the trailer body upwards (with the tractor and the trailer parked
in the uphill direction).
•
No person is allowed to remain near the tipped trailer body and
within the range of discharged load.
•
Do not decouple the trailer from the tractor when the load body
is lifted.
•
Before unloading by tipping the trailer load body, you must always
verify that the pins have been removed on the correct side of the
trailer. Failure to remove the pins may destroy the trailer!
•
Do not transport any persons on the trailer.
Open the top lock of the load body by moving the handle up and depressing the button under
the handle at the same time. Open the bottom locks of wall segments by operating the central
lock handle:
