23
5. STORAGE, SALE AND SHIPPING TO USER
STORAGE
• Protect the trailer against direct exposure to sunlight and rain. Park it with its land wheels
chocked on a hard-paved ground (reduce tyre pressure and cover the tyres if there is a risk
of exposure to sunlight).
• If the trailer is exposed to weather, periodically check for rainwater accumulation in the
trailer. Note all damage to the paint coat. Clean and degrease spots of damaged paint. Next,
repaint with the same colour and coat thickness.
• Long-term storage is allowed in sheltered rooms only.
SALE
• The buyer picks the trailer from the manufacturer or the sales representative on their own,
or arranges the delivery with the manufacturer.
• The trailer is sold as fully assembled and ready for operation, complete with the basic
equipment listed in section 1.2 of this manual. Optional equipment is available for extra
charge.
• The sales representative personnel is required to introduce the buyer to the design and
operation of the trailer, along with safety requirements and warranty conditions.
• The buyer shall verify the following:
-
the trailer is complete, undamaged and with all basic equipment;
-
the nameplate located on the chassis front crosspiece has the serial number stamped that
matches the data in the warranty card;
-
the warranty card has been properly filled out with the identification data on the nameplate.
SHIPPING TO USER
The trailer shall be transported from the sales representative on wheels as coupled with a
tractor or on a low-bed trailer. Before loading on a low-bed trailer, connect the farming trailer to
the transport hitch and the braking lines of the tractor. Drive the farming trailer to the low-bed
trailer with the extended ramps. Next, secure the farm trailer with wheel chocks. Afterwards,
disconnect the braking system and decouple from the tractor. Secure the farming trailer with
special transport straps. Before unloading the transported trailer, first extend the low-bed trailer
ramps and release the transport straps used to secure the farming trailer from falling down in
transit. Approach with a tractor and connect the trailer braking system. Next, remove the wheel
chocks from the trailer. When all of the above has been completed, drive the trailer from the
low-bed.
