11
29. Additional protection for the transported load on the trailer (chains, tarpaulin, plastic sheet,
nets, transport straps, etc.) may be applied only with tractor engine off and the ignition key
removed.
30. Remove functional disturbances of attachments only with the engine turned off and the
ignition key removed.
31. Enter the load body surface only after turning off the drive and stopping the tractor engine.
Remove the ignition key.
32. Always turn off the engine and remove the ignition key before exiting the tractor. Engage
the parking brake and secure the trailer with the wheel chock.
33.
When travelling on public roads, the permissible axle set load of the T730/1 trailer
must not exceed 102 kN, the permissible axle set load of the T730/2 trailer must not
exceed 120.1 kN each, and the permissible axle set load of the T730/3 trailer must not
exceed 138.4 kN.
34. The maximum permissible pressure of the hydraulic system is 16 MPa.
35. The maximum permissible pneumatic pressure of the single-line system is 0.63 MPa or 0.8
MPa for the two-line system.
36. Prepare the trailer for work (connect the pneumatic and hydraulic hoses, etc.) with the tractor
engine off and the ignition key removed.
37. The manufacturer delivers the trailer completely assembled.
38. All hydraulic lines must be replaced every 6 years.
39. Noise – the equivalent sound pressure emission corrected by A characteristics (LpA) does
not exceed 70 dB.
