manualshive.com logo in svg

Metal-Fach GRAND PELLET 100, Technical And Operational Documentation

Share
Download
Metal-Fach GRAND PELLET 100 Technical And Operational Documentation Download Page 54

METAL-FACH 

Heating Technology 

 

 

52 

 

Personal data provided in this form shall be processed by Jacek Kucharewicz conducting business activity under 
the name Metal Fach Jacek Kucharewicz, 16-

100 Sokółka, ul. Sikorskiego 66, NIP: 545

-100-10-62, tel48 

85  711  94  56  for  the  purpose  of  implementing  the  provisions  contained  in  the  warranty  conditions  -  in 
accordance with the Act of 29 August 1997 on personal data protection (consolidated text: Journal of Laws 2014, 
item  1182).  The  user  has  the  right  to  access  the  content  of  his  personal  data,  to  correct  them,  to  request  the 
cessation  of  data  processing  and  to  object  to  the  processing  of  data  in  cases  indicated  by  law.  Any 
correspondence relating  to the processing  of personal data shall  be directed  to the address: Metal Fach  Jacek 
Kucharewicz, 16-

100 Sokółka, 66 Sikorskiego St. Providing personal data is voluntary. Pursuant to the Personal 

Data Protection Act of 29 August 1997 (consolidated text: Journal of Laws 2014, item 1182), we inform you that 
the personal data provided in this form will be protected against unauthorised access. 

 

 

Summary of Contents for GRAND PELLET 100





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands