18
SWITCHING THE DEVICE ON AND OFF
HOW TO SWITCH OFF MAINTENANCE MODE 431
The last step required before the vehicle can be consigned to its owner, is to render the device operational. This step
enables the product to be finally armed so that it can send alarm calls or warnings should a situation arise where this is
necessary. To do this, enter INSTALLER Level and call up the appropriate function:
HOW TO SWITCH ON MAINTENANCE MODE 430
The device must enter maintenance mode again if extra work is required at a later date, or if the device needs replacing or
quite simply if the vehicle’s battery must be disconnected or replaced. To do this, ask the owner to access the UNBLOCK
FUNCTIONS level; he must enter his secret passwords to do this and the installer can then enter his level by keying in his
own password. At this stage, locate the function to activate maintenance mode and thus prevent alarm calls from being
made.
SWITCHING OFF THE DEVICE
In order to switch the device off correctly, it is important to first enter maintenance status and then disconnect the power
supply. This ensures the product will switch off completely instead of remaining powered by means of its internal back up
batteries.
Failure to comply with the above instructions will result in the device remaining operational for as long as its internal battery
remains charged and battery alarm calls will be placed if configuration of the relative list was completed.
Maintenance mode
Disable?
•
To confirm and exit, press
OK.
•
To cancel and exit, press
C
Maintenance mode
Enable?
•
To confirm and exit, press
OK
.
•
To cancel and exit, press
C.
Installer OK
Select function :
Installer OK
Select function :
Summary of Contents for GPA600
Page 1: ...INSTALLATION AND PROGRAMMING INSTRUCTION MANUAL Pager GPA600 GPA800 V810690A ...
Page 4: ......
Page 19: ...NOTES ...
Page 20: ......
