Meta System GPA600, Installation And Programming Manual

Page: 15 / 20

15
Installer OK
Select function :
Speed limit
31 = 310 Kmh
SPEED LIMIT 439
• This menu is used to set the speed limit. A warning that the speed limit
has been exceeded will be sent at speeds above this.
• Possible selections: 0
÷
310 (Km/h)
• To modify the setting, press + or - , or key in only the first two digits of
the speed to be set. The zero will be added automatically.
• To confirm and exit, press OK
• To cancel and exit, press C
DISPLAY WHAT IT MEANS
QUICK
COMMAND
SN (read only)
301.0.00464.0132
ok 44’ 42’ 47’’ N
010’ 36’ 57’’ E [OK]
This is the serial number of the device.
It always differs from product to product (the number shown
opposite is by way of example!)
This is the version of the device’s software.
This menu is used to verify its update status.
(the number shown opposite is by way of example!)
If you press OK , you can listen to all the synthesised voice
messages that the device is able to provide.
Press
OK again to stop listening
The displays the number of the SMS service centre.
The device enters this number automatically according to the
SIM card that is inserted.
This number must not be changed!
Press OK to enter and exit the menu!
This menu displays the coordinates of the place where you
are located. They are provided in the format: DEGREES-
MINUTES-SECONDS. It is possible to identify the exact
position of the vehicle by means of the mapping system
provided on the website
www.meta-sat.com
.
If the coordinates all appear as zeros, check the GPS
module and the relative connections (see section on “Check
GPS status”)
DISPLAY-ONLY MENUS
206
Listen to
voice messages?
358
SC SMS number
+393492000200
GPS Position?
374
446
207
Software release
PAA020 02.05.6