Operating
the Software
Software
38
/
58
20.03.2015
8LE-D23_BA_E
Identification and Correction of Invalid Parameters
If invalid values have been set for a parameter, the corresponding slide control is marked red in the
display. The graphic illustrations for
Trigger
and
LED Light
are NOT displayed. The valid parameters
are provided below (Figure 27, page 38).
Figure 26: Illustration of invalid parameters
Push the slide marked red back until the red marking disappears or adjust other parameters so
that the red marking disappears.
You have successfully parameterized the M=Light.
Figure 27: Admissible parameters