Operating
the Software
Software
36
/
58
20.03.2015
8LE-D23_BA_E
Adjusting the Pulse Width
[µs]
This parameter defines the duration of the light pulse.
Highlight the M=Light LED for which the settings are to be made.
For intensities < 150%, set a value of up to 50% of the
Pulse Period
[µs]
value
.
For intensities > 150%, set a value of up to 20% of the
Pulse Period
[µs]
value
.
Press
Send
.
The required light pulse duration has been set for the highlighted M=Light LED.
Figure 24: Example,
Pulse width
500µs at
Pulse Period
of 1000µs
Figure 25: Example,
Pulse width
300µs at
Pulse Period
of 1000µs
Adjusting the Pulse Delay
With this parameter, the delay of the light impulses is determined according to the edge of the
Sync signal from the camera.
Highlight the M=Light LED for which the settings are to be made.
Read the required delay from the camera manufacturer's manual.
Set the value by the
Pulse delay
[µs]
slide control so that the slide control does NOT become red.
Press Send.
The required delay has been set for the highlighted M=Light LED.
Adjusting the Power
This parameter defines the intensity of the light pulse.
Highlight the M=Light LED for which the settings are to be made.
Adjust the intensity at the
Power
such that NONE of the slide controls become red.
Press Send.
The required intensity has been set for the highlighted M=Light LED.