Operating
the Software
Software
22
/
58
20.03.2015
8LE-D23_BA_E
5.3. Operating the Software
5.3.1. User Interface and Status Indicator without M=Light LED
Figure 11: User interface and status indicator without M=Light LED connected
Designation
Description
1
In the M=Light Explorer you can view the M=Light LEDs connected with the software,
both individually and in groups.
2
Command line for all M=Light LEDs connected.
3
Tabs for operation and status indication of M=Light LEDs that are marked in the
M=Light Explorer.
Quick Connect
Connects the M=Light LEDs already detected during the previous application with the
software.
Use this process if the wiring, the CAN-Bus address of the M=Light LEDs or the
Groups.ini file has NOT been changed.
Press Quick Connect.
The M=Light LEDs already detected during the previous application are
connected with the software.
Connect
Scans the entire bus system (up to 255 M=Light LEDs).
Use this process if the wiring, the CAN-Bus address of the M=Light LEDs or the
Groups.ini file has been changed.
Press Connect.
The entire bus line is scanned and all M=Light LEDs are connected to the
software. This process may take a few minutes.