3. Web-based Interface
50 User Manual
Sensitivity:
You can alternatively customize the camera’s sensitivity to a blur. The camera will
judge whether it has been tampered based on the sensitivity threshold specified.
Action
OFF:
No action will be taken, but an alarm will be logged.
FTP:
Recorded video clips/JPEG files will be uploaded to the FTP server when alarm is triggered.
SMTP:
Notification email with the recorded JPEG files attached will be sent to the SMTP server.
SD Card:
Recorded video clips will be saved to the SD card when the alarm is triggered.
3.5.5 Audio Detection
With the
Audio Detection
enabled, when the camera detects any sound, the camera will generate
an alarm and then take a specified action.
Configuration
Audio Sensitivity: Specify the camera’s sensitivity level to the audio signal. The higher the
sensitivity, the lower the volume is required to set off an alarm.
When set to
OFF
, the audio detection is disabled.
Action
Specify the action to be taken when an alarm is triggered upon audio detection:
OFF:
No action will be taken, but an alarm will be logged.
FTP:
Recorded video clip will be uploaded to the FTP server when the alarm is triggered.
SMTP:
A notification email attached with the recorded video clip will be sent to the SMTP server.
SD Card:
Recorded video clip will be saved to the SD card when the alarm is triggered.
Tip
Caution
Warning
Note
To perform a video recording, you must select MJPEG codec for one of the streams.
