3. Web-based Interface
User Manual 47
Configuration
Motion Sensitivity:
Specify the sensitivity to moving objects before the camera triggers an
alarm. The higher the sensitivity, the slighter the movement is required to set off an alarm.
You can alternatively select
User Define
and enter a value from 1 to 100 in the
Customized
Threshold
field. When the motion within a specified area exceeds the threshold, an alarm will be
triggered.
Select
OFF
to disable the motion detection
Motion Area Setting
Motion area setting:
Click target squares displayed on the screen to define detection areas;
once configured, click
Save Motion Area
to save settings.
Action
Specify the action to be taken when an alarm is triggered upon motion detection:
OFF:
No action will be taken, but an alarm will be logged.
FTP:
Recorded video clips/JPEG files will be uploaded to the FTP server when alarm is triggered.
SMTP:
Notification email with the recorded JPEG files attached will be sent to the SMTP server.
SD Card:
Recorded video clips will be saved to the SD card when the alarm is triggered.
3.5.2 External Alarms
If external alarm devices, e.g., sensors and alarms, are connected to the camera’s alarm input/
output, the following settings must be made:
Configuration
Setting:
Enable the Alarm I/O that is connected with the respective external alarm device.
Level:
Set the (electricity) current as low or high to define the active state.
