3. Web-based Interface
28 User Manual
Auto:
Allows the camera to automatically switch between color and black/white modes.(Available
only when traffic mode is user)
Forced B/W:
Forces the camera stay in black/white mode at all times.
Forced Color:
Forces the camera stay in color mode at all times.
External:
Enable this option if an external alarm input device is connected to control the IR cut
filter.
• Alarm:
Set alarm input as 1 or 2 according your actual connection.
• Active:
Select (electricity) current status as high or low to define active status.
3.3 Image Settings
3.3.1 Codec
The Codec page allows you to configure the video streams for the camera. You can optionally
configure a secondary or third stream to a resolution as required by your third-party device or
software.
Camera Name Settings
Enter a descriptive name of the camera. Note that if you want to make the camera ONVIF
compliant (see
Network
>
ONVIF
), no space is allowed in the camera name.
