Page 6
Identification
T-2111 TRANSFER CASE
T - 2 1 1 1 - T 1 0 1 - 1 0 0
T-2111 LUBE PUMP
L P - 2 1 1 1 A - 1
T-2111 DECLUTCH/PTO/LOCKUP
P - 2 1 1 1 A - 1
Rockwell transfer case.
Number of speeds in transfer case.
Basic transfer case rating in
thousands of ft.. lbs.
Lube pump.
Lube pump designed for T-2111
transfer case.
Note: Lube pump required when
top shaft PTO provided.
PTO
Group of BOMs originally designed
for the T-2111 transfer case.
Bill of material (BOM) sequence
number. The first BOM in the series
is not given a number designation.
Pump group for use with 5,450 ft. lb.
(7400 N•m) PTO only. Absence of
“A” designation indicates use on
11,000 ft. lb. (14900 N•m) PTO.
LP-2111-1 on top of case.
Bill of material (BOM) sequence
number. The first BOM in the series
is not given a number designation.
Assembly designed with 5,450 ft. lb.
(7400 N•m). rated components.
Absence of “A” designation
indicates use of 11,000 lb.-ft.
(14900 N•m) components. Other
alphanumeric characters denote
configuration options.
* If a transfer case contains a combination of options, use the first
designation that the transfer case matches from the following given order:
- PLAIN IN/OUT TRANSFER CASE (No ID letter designation)
PD - PROPORTIONAL DIFFERENTIAL
HP - HYDRAULIC PUMP
T - THRU SHAFT
HC - HIGH CAPACITY DECLUTCH (20,000 lb.- ft./ 27116 N•m)
D - DECLUTCH/PTO UNIT
1.00:1 ratio. (standard)
Specification sequence number
associated with Bill of Material
T:
Thru shaft configuration*
D:
Declutch/PTO units
PD: Proportional differential units
HP: Hydraulic pump mount
SD: Short drop
SPD:Short, proportional differential
HC: High capacity declutch
(200,000 lb.- ft./ 27100 N•m)
When T-case used as
“Tower PTO.”
Pro Gear and Transmission • 906 W. Gore St. Orlando, FL 32805 • 1 (877) 776-4600 / (407) 872-1901 • [email protected]