COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0015-0B
SCORPION™ 9000 MANUAL
21
WOOD STUDDED WALLS
BRICK/CONCRETE WALLS
METAL STUDDED WALLS
CINDER BLOCK
WALLS
Figure 11 - WALL STUDS
Figure 12 - MOLLY BOLTS
Figure 13 - WALL BRACKET
Figure 14 - LOCATION OF PRICE DECAL
68”
FROM
FLOOR
FLOOR
CENTER LINE OF
STUD
SEE FIGURE 12
FOR MOUNTING
HARDWARE.
SEE FIGURE 11 FOR MOUNTING
HARDWARE TO BE USED WITH THE
TYPE OF WALL ON WHICH YOUR
GAME IS TO BE MOUNTED.
SEE FIGURE 12 FOR MOUNTING
HARDWARE TO BE USED WITH
THE TYPE OF WALL ON WHICH
YOUR GAME IS TO BE MOUNTED.
PLEASE NOTE HARDWARE IS TO
BE INSTALLED ON THE TOP AND
BOTTOM OF THIS BRACKET.
INSTRUCTIONS FOR PLASTIC OR
LEAD EXPANSION ANCHORS:
1.
DRILL AS REQUIRED
2.
HAMMER ANCHOR FLUSH TO
WALL (STEP 1)
3.
USE A #10x 1” LONG SHEET
METAL SCREW W/WASHER (if
needed). PUT THROUGH HOLE
IN WALL BRACKET &
TIGHTEN (STEP 2)
INSTRUCTIONS FOR HOLLOW
WALL ANCHORS:
1.
DRILL A 5/16” HOLE
2.
INSERT ANCHOR AND
TIGHTEN (STEPS 1 & 2)
3.
PLACE SCREW AND WASHER
THROUGH HOLE IN WALL
BRACKET AND TIGHTEN
(STEP 3)
FOR USE WITH
HOLLOW WALLS
ONLY
FOR USE WITH
CINDER BLOCK,
BRICK OR
CONCRETE
WALLS ONLY
