COPYRIGHT © 1996 MERIT INDUSTRIES, INC.
PM0015-0B
SCORPION™ 9000 MANUAL
11
The button/lamp test will illuminate the lamp
corresponding to each button pressed. The Player
displays will show “button tESt.”
NOTE:
THE START/PLAYER CHANGE BUTTON WILL
ALWAYS ILLUMINATE AND SOUND A TONE WHEN
PRESSED.
Test 13 - Missed Dart/Auto Player Change Test
The missed dart detector test will illuminate the ‘01
lamp and the Player 1 lamp when a missed dart is
detected. The automatic player change will flash the
‘01 Equal and Player 2 lamps when a person is
detected in front of the machine. The Player 1 display
will show “tap,” the Player 3 display will show “a.p.c.”
and the Player 4 display will show “-hi” or
“-lo” if the missed dart detector/automatic player
change feature is enabled. The display will show “NU”
if the feature is disabled.
NOTE:
THE PLAYER 4 DISPLAY WILL SHOW “-HI” WHEN
THE ULTRASONIC UNIT IS TURNED “OFF” DURING
A PLAYER’S TURN, AND “-LO” WHEN THE UNIT IS
TURNED “ON.”
Test 14 - DIP Switch Test
The temporary score display will show “DIP” to
indicate the test. The DIP switch settings will be
shown with vertical bars on the Player score displays.
Switch bank 1 is shown in the Player 1 and 2 displays
(with switch 1 to the left) and switch bank 2 will be in
the Player 3 and 4 displays (switch 1 on the left). A
vertical bar on top indicates the switch is on; a vertical
line on the bottom indicates the switch is off.
Test 15 - Program Version Display
“Pro” will be displayed in the temporary score display
indicating program version and the program version
number will appear in the Player 1 display. The
current revision level will be shown in the Player 2
display. The actual program number will be shown in
the Player 3 and 4 displays.
Test 16 - Coin Mechs Test
This allows the operator to test the coin mechs
without adding credits. When a coin is deposited the
coin song is played and the mech number is
displayed on the overhead, but no credits are added.
CLEARING BOOKS/RESET MODE
Contact Merit Customer Service, at 1-800-445-9353,
for information concerning “Clearing Books/Reset
Mode.”
