manualshive.com logo in svg

Mercury Vessel View 4, User Manual

Share
Download
Mercury Vessel View 4 User Manual Download Page 6

Section 1 - Getting Started 

Page  2

90-8M0120668   

eng

  MARCH  2016

VesselView 4 Overview

IMPORTANT:  VesselView is a multifunction display (MFD) that is compatible with products manufactured by Mercury Marine

Outboards, Mercury MerCruiser, and Mercury Diesel. Some of the functions explained in this manual will be disabled

depending on the power package it is connected to.
VesselView 4 is a comprehensive boat information center that can display information for up to two gasoline or diesel engines.

It continuously monitors and reports operating data including detailed information such as water temperature and depth, trim

status, boat speed and steering angle, and the status of fuel, oil, water, and waste tanks.
VesselView can be fully integrated with a vessel’s global positioning system (GPS) or other NMEA‑compatible devices to

provide up‑to‑the‑minute navigation, speed, and fuel‑to‑destination information.
VesselView is a display extension for autopilot and joystick operations. All functionality of these piloting features are controlled

through Mercury Marine's autopilot control area network (CAN) pad. VesselView will show if a mode of control is active or in

standby; pop‑ups will appear as the vessel arrives at waypoints, prompting response to turns. Additional display text can be

used to adjust the engines and drives to achieve maximum efficiency.
VesselView is equipped with a micro SD card port that allows an authorized OEM or dealership to import the vessel personality

configuration. It can also be used by the owner to upgrade to the latest software version. When more than one VesselView is

used, either as a triple‑ or quad‑engine application, or a second helm, the same micro SD card can be used to download those

configurations.

Buttons

VesselView 4

a -

PAGES button

b -

LEFT arrow button

c -

RIGHT arrow button

d -

ENTER button

•

Pressing the PAGES button will activate the scroller bar menu. Pressing the PAGES button again exits the scroller bar

menu.

•

Use the LEFT and RIGHT arrow buttons to navigate (highlight) fields on the screen.

•

Press the ENTER button when the desired icon is highlighted to enter that data field or function.

a

b

d

51534

c

Summary of Contents for Vessel View 4






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands