manualshive.com logo in svg

Mercury Vessel View 4, User Manual

Share
Download
Mercury Vessel View 4 User Manual Download Page 23

Section 2 - Initial Screens and Setup Wizard

90-8M0120668   

eng

  MARCH  2016

Page  19

1. When the scheduled maintenance time is fully depleted, the user‑selected data area will display a general maintenance

reminder to perform the scheduled maintenance.

52447 

2. Open the + icon to expand the text. You can reset the maintenance to 100% or exit the screen.

NOTE: The wrench icon maintenance reminder will be displayed in the system status field until the fault is cleared from the

system.

52448

3. After resetting the maintenance reminder, the wrench icon no longer appears in the system status field.

56985

System Scan ‑ Scan Report

When a system scan is completed and there are no faults, maintenance reminders, or communication errors, the user‑selected

data area will display SCAN COMPLETE with a report and a good stewardship message. The scan report will be displayed until

the engine is put into gear or use the LEFT or RIGHT arrow button to highlight the X and press the ENTER button
•

The good stewardship messages are randomly selected. Examples include: Do you have flotation devices, Mercury

reminds you to please boat safely.

Summary of Contents for Vessel View 4






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands