manualshive.com logo in svg

Mercury Vessel View 4, User Manual

Share
Download
Mercury Vessel View 4 User Manual Download Page 32

Section 3 - Screen Overview and Operation 

Page  28

90-8M0120668   

eng

  MARCH  2016

2. Press the arrow button to highlight the ECO icon and press the enter button. The user‑selected data area will display the

ECO icon element with a short description on how to achieve the best fuel economy.

52165

NOTE: When ECO mode is active, system footer data field 4 location will default to displaying trim values, if another data

value is currently being displayed. Trim values will be displayed in the bottom right corner of the screen if another data

value is currently being displayed.

52166

ECO mode active trim values

ECO Minimum and Maximum Values

When ECO mode is active and the engines are in forward gear, the minimum and maximum value lines will appear in the RPM

sweep. These lines display the active optimized range that is to be calculated. This window can be adjusted in the 

Settings

menu.

52167

ECO RPM and Trim Targets

When the RPM values reach the minimum value range, RPM and trim targets will appear. A colored line will span the RPM

sweep with colored targets to inform the user where the target values are and will change color when they have achieved

optimization.

Summary of Contents for Vessel View 4






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands