Mercury SMARTCRAFT, Operation Manual

Page: 79 / 96

SMAR
T
T
ACH & SPEED
4-2
SMART TACH & SPEEDOMETER
gog95
4
3
2
1
5
Continued Next Page
Speedometer
osl2
Speedometer Displays
When the ignition is turned on, the speedometer will show the last
screen that was displayed before the ignition was turned off.
Press
MODE
to change display screens. You can revert back to the
previous screen by pressing and holding
MODE
for 2 seconds. This
will reverse the display rotation.
NOTE:Readings can be displayed in English (U.S.) or Metric. Refer
to Calibrations.
1. Clock - Temp – Clock, air temperature and water temperature.
The air and water temperature sensors will have to be con-
nected to obtain display readings.
2. Fuel Level – Displays the amount of fuel remaining.
3. Oil Level – Displays the amount of engine oil remaining.
4. RPM Synchronizer – Dual Engines – Monitors the revolutions of
both engines. Allows throttle adjustments to keep each running
uniformly.
5. Trim Synchronizer – Dual Engines – Displays the trim position of
both engines. Simplifies keeping trim levels equal.