manualshive.com logo in svg

Mercury Sable 2000, Owner'S Manual

The Mercury Sable 2000 Owner's Manual is a comprehensive guide that provides vital information, specifications, and maintenance instructions for this iconic vehicle. Experience hassle-free and convenient access to this essential manual by easily downloading it for free from our website. Unlock the secrets of your Mercury Sable 2000 today!

Share
Download
background image

One time disable

Anytime the safety belt is buckled and then unbuckled during an ignition
ON cycle, Belt Minder will be disabled for that ignition cycle only. The
safety belt needs to be latched for a minimum of 3 seconds before belt
minder is disabled.

Deactivating/activating the belt minder feature

Read steps 1 - 9 thoroughly before proceeding with the
deactivation/activation programming procedure.

The Belt Minder feature can be deactivated/activated by performing the
following procedure:

Before following the procedure, make sure that:

•

the parking brake is set

•

the gearshift is in P (Park) (automatic transmission).

•

the ignition switch is in the OFF position

•

all vehicle doors are closed

•

the driver’s safety belt is unbuckled

•

the parklamps/headlamps are in OFF position (If vehicle is equipped
with Autolamps, this will not affect the procedure.)

To reduce the risk of injury, do not deactivate/activate the Belt
Minder feature while driving the vehicle.

1. Turn the ignition switch to the RUN (or ON) position. (DO NOT
START THE ENGINE)

2. Wait until the safety belt warning light turns off. (Approximately 1–2
minutes)

•

Steps 3–5 must be completed within 60 seconds or the procedure will
have to be repeated.

3. Buckle then unbuckle the safety belt three times, ending with the
safety belt unbuckled. This can be done before or during Belt Minder
warning activation.

4. Turn on the parklamps/headlamps, turn off the parklamps/headlamps.

5. Buckle then unbuckle the safety belt three times, ending with the
safety belt unbuckled.

Seating and safety restraints

91

Summary of Contents for Sable 2000









































































































































































































































Reviews:

No comments

Related manuals for Sable 2000

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
Acdeos AXS FL Manual preview
AXS FL
Brand: Acdeos Pages: 38
Eaton Green Motion Building Quick Start Manual preview
Green Motion Building
Brand: Eaton Pages: 12
Q'STRAINT QLK-150 Installation Instructions Manual preview
QLK-150
Brand: Q'STRAINT Pages: 10
TATA Motors Safari Owner'S Manual & Service Book preview
Safari
Brand: TATA Motors Pages: 161
TAUBENREUTHER 16 - 590 Fitting Instructions Manual preview
16 - 590
Brand: TAUBENREUTHER Pages: 11
Yakima SKYBOX Series Manual preview
SKYBOX Series
Brand: Yakima Pages: 15
GOgroove SMARTmini AUX Operating Manual preview
SMARTmini AUX
Brand: GOgroove Pages: 9
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
Subaru 2005 Baja Owner'S Manual preview
2005 Baja
Brand: Subaru Pages: 34
Volkswagen 1973 Convertible Owner'S Manual preview
1973 Convertible
Brand: Volkswagen Pages: 80
Nav TV W204PGM Operation Instructions preview
W204PGM
Brand: Nav TV Pages: 3
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
Safe Fleet PRIME DESIGN VBI-FT21B Manual preview
PRIME DESIGN VBI-FT21B
Brand: Safe Fleet Pages: 12
Honda Plusone Console 4521011B User Information preview
Plusone Console 4521011B
Brand: Honda Pages: 4
Edelbrock 460 Ford Installation Instructions preview
460 Ford
Brand: Edelbrock Pages: 2

Brands by name

Popular brands

Load more brands