manualshive.com logo in svg

Mercury Sable 2000, Owner'S Manual

The Mercury Sable 2000 Owner's Manual is a comprehensive guide that provides vital information, specifications, and maintenance instructions for this iconic vehicle. Experience hassle-free and convenient access to this essential manual by easily downloading it for free from our website. Unlock the secrets of your Mercury Sable 2000 today!

Share
Download
background image

The temperature grade for this tire is established for a tire that
is properly inflated and not overloaded. Excessive speed,

underinflation, or excessive loading, either separately or in
combination, can cause heat buildup and possible tire failure.

SERVICING YOUR TIRES

Checking the tire pressure

•

Use an accurate tire pressure gauge.

•

Check the tire pressure when tires are cold, after the vehicle has been
parked for at least one hour or has been driven less than 5 km (3
miles).

•

Adjust tire pressure to recommended specifications found on the
Certification Label located on the driver’s door panel.

Improperly inflated tires can affect vehicle handling and can fail
suddenly, possibly resulting in loss of vehicle control.

Tire rotation

Because your vehicle’s tires perform different jobs, they often wear
differently. To make sure your tires wear evenly and last longer, rotate
them as indicated in the Scheduled Maintenance Guide. If you notice
that the tires wear unevenly, have them checked.

•

Four tire rotation

Maintenance and care

175

Summary of Contents for Sable 2000









































































































































































































































Reviews:

No comments

Related manuals for Sable 2000

Acdeos AXS FL Installation Instruction preview
AXS FL
Brand: Acdeos Pages: 7
Raven CR7 Calibration Manual preview
CR7
Brand: Raven Pages: 24
Weather Guard 237 Assembly And Installation Instructions preview
237
Brand: Weather Guard Pages: 4
Jeep 2009 Wrangler Quick Reference Manual preview
2009 Wrangler
Brand: Jeep Pages: 12
Jeep 2008 Liberty Installation Instructions Manual preview
2008 Liberty
Brand: Jeep Pages: 6
DEFA 412737 Fitting Instructions Manual preview
412737
Brand: DEFA Pages: 7
Prorack K869 Fitting Instructions Manual preview
K869
Brand: Prorack Pages: 15
Kolpin Outdoors 25-1080 Assembly & Owners Manual preview
25-1080
Brand: Kolpin Outdoors Pages: 6
Schartec CR 4 Manual preview
CR 4
Brand: Schartec Pages: 2
Toyota 4Runner 2019 Quick Reference Manual preview
4Runner 2019
Brand: Toyota Pages: 52
femkes Hopper on Top User Manual preview
Hopper on Top
Brand: femkes Pages: 7
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
Mobility Networks RPH 35.13 Use And Maintenance Manual preview
RPH 35.13
Brand: Mobility Networks Pages: 52
TEINHOF V-295 Fitting And Operation Manual preview
V-295
Brand: TEINHOF Pages: 2
ZAPTEC ZapCharger Portable C1 User Manual preview
ZapCharger Portable C1
Brand: ZAPTEC Pages: 20
AutoLoc SB3PR Series User Manual And Installation Manual preview
SB3PR Series
Brand: AutoLoc Pages: 6
Lincoln NAUTILUS 2022 Owner'S Manual preview
NAUTILUS 2022
Brand: Lincoln Pages: 586
Ford Mustang 2007 Supplement Manual preview
Mustang 2007
Brand: Ford Pages: 40

Brands by name

Popular brands

Load more brands