manualshive.com logo in svg

Mercury Sable 2000, Owner'S Manual

The Mercury Sable 2000 Owner's Manual is a comprehensive guide that provides vital information, specifications, and maintenance instructions for this iconic vehicle. Experience hassle-free and convenient access to this essential manual by easily downloading it for free from our website. Unlock the secrets of your Mercury Sable 2000 today!

Share
Download
background image

•

Recline the seat slightly (one or two degrees) from the upright
position.

Do not put anything on or over the air bag module. Placing
objects on or over the air bag inflation area may cause those

objects to be propelled by the air bag into your face and torso causing
serious injury.

Do not attempt to service, repair, or modify the Air Bag
Supplemental Restraint System or its fuses. See your Ford or

Lincoln-Mercury dealer.

Modifications to the front end of the vehicle, including frame,
bumper, front end body structure and tow hooks may effect the

performance of the air bag sensors increasing the risk of injury. Do not
modify the front end of the vehicle.

Children and air bags

For additional important safety
information, read all information on
safety restraints in this guide.

Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a collision.

Air bags can kill or injure a
child in a child seat.

NEVER

place a rear-facing child

seat in front of an active air bag. If
you must use a forward-facing
child seat in the front seat, move
the seat all the way back.

Seating and safety restraints

95

Summary of Contents for Sable 2000









































































































































































































































Reviews:

No comments

Related manuals for Sable 2000

Porsche 911 GT3 - Owner'S Manual preview
911 GT3 -
Brand: Porsche Pages: 195
Rightline Gear Car Top Duffle Bag Setup Manual preview
Car Top Duffle Bag
Brand: Rightline Gear Pages: 2
Axxess AXGMLN-08 Installation Instructions Manual preview
AXGMLN-08
Brand: Axxess Pages: 8
AMP Research 75135-01A Installation Manual preview
75135-01A
Brand: AMP Research Pages: 12
Havis-Shields Half Size Trunk Box Organizer C-TBO-CV Installation Instructions preview
Half Size Trunk Box Organizer C-TBO-CV
Brand: Havis-Shields Pages: 1
Volvo S60 2012 Quick Manual preview
S60 2012
Brand: Volvo Pages: 8
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
Ecco 13 Series Installation And Operation Instructions Manual preview
13 Series
Brand: Ecco Pages: 24
Unex OBU-352EC Quick Start Manual preview
OBU-352EC
Brand: Unex Pages: 30
Edelbrock 5756 Installation Instructions preview
5756
Brand: Edelbrock Pages: 1
Menabo YELO 4 NS Fitting Instructions Manual preview
YELO 4 NS
Brand: Menabo Pages: 8
Subaru 2015 Forester Quick Reference Manual preview
2015 Forester
Brand: Subaru Pages: 16
Kuda 050130 Installation Instruction preview
050130
Brand: Kuda Pages: 4
Waeco MagicWatch MWE850 Installation And Operating Manual preview
MagicWatch MWE850
Brand: Waeco Pages: 200
Westin 23-1970 Instructions preview
23-1970
Brand: Westin Pages: 3
Whispbar K665 Manual preview
K665
Brand: Whispbar Pages: 31
Adaptiv Mini CAM-AU9-AD Fitting & User Manual preview
CAM-AU9-AD
Brand: Adaptiv Mini Pages: 4
Chevrolet 2003 TraiIBIazer Owner'S Manual preview
2003 TraiIBIazer
Brand: Chevrolet Pages: 426

Brands by name

Popular brands

Load more brands