manualshive.com logo in svg

Mercury Sable 2000, Owner'S Manual

The Mercury Sable 2000 Owner's Manual is a comprehensive guide that provides vital information, specifications, and maintenance instructions for this iconic vehicle. Experience hassle-free and convenient access to this essential manual by easily downloading it for free from our website. Unlock the secrets of your Mercury Sable 2000 today!

Share
Download
background image

SERVICE RECOMMENDATIONS

To help you service your vehicle:

•

We highlight do-it-yourself items in the engine compartment for easy
location.

•

We provide a Scheduled Maintenance Guide which makes tracking
routine service easy.

If your vehicle requires professional service, your dealership can provide
necessary parts and service. Check your “Warranty Guide” to find out
which parts and services are covered.

Use only recommended fuels, lubricants, fluids and service parts
conforming to specifications. Motorcraft parts are designed and built to
provide the best performance in your vehicle.

PRECAUTIONS WHEN SERVICING YOUR VEHICLE

Be especially careful when inspecting or servicing your vehicle.

•

Do not work on a hot engine.

•

When the engine is running, keep loose clothing, jewelry or long hair
away from moving parts.

•

Do not work on a vehicle with the engine running in an enclosed
space, unless you are sure you have enough ventilation.

•

Keep all lit cigarettes, open flames and other lit material away from
the battery and all fuel related parts.

If you disconnect the battery, the engine must “relearn” its idle
conditions before your vehicle will drive properly, as explained in the

Battery

section in this chapter.

Working with the engine off

1. Set the parking brake, and ensure the gearshift is securely latched in
park.

2. Turn off the engine and remove the key.

3. Block the wheels to prevent the vehicle from moving unexpectedly.

Working with the engine on

1. Set the parking brake and ensure the gearshift is securely latched in
P (Park).

2. Block the wheels to prevent the vehicle from moving unexpectedly.

Maintenance and care

147

Summary of Contents for Sable 2000









































































































































































































































Reviews:

No comments

Related manuals for Sable 2000

PAC I GM3 Instruction Manual preview
I GM3
Brand: PAC Pages: 15
Vaisala MD30 Setup Manual preview
MD30
Brand: Vaisala Pages: 24
Yakima K831 Manual preview
K831
Brand: Yakima Pages: 8
Edelbrock Chevrolet 5783 Installation Instructions preview
Chevrolet 5783
Brand: Edelbrock Pages: 1
FORM FIT 1308 Installation Instructions preview
1308
Brand: FORM FIT Pages: 2
A-Tach 50092 Quick Start Manual preview
50092
Brand: A-Tach Pages: 2
VER-MAC PCMS Series Operation, Safety And Maintenance Manual preview
PCMS Series
Brand: VER-MAC Pages: 64
Aries 205039 Installation Manual preview
205039
Brand: Aries Pages: 5
Mercedes-Benz MY17 c-class Operator'S Manual preview
MY17 c-class
Brand: Mercedes-Benz Pages: 354
Calix group TYP MVP 823 Assembly Instructions preview
TYP MVP 823
Brand: Calix group Pages: 4
v.link VL2-DVD900 Manual preview
VL2-DVD900
Brand: v.link Pages: 19
rough country RCH5100 Installation Instructions preview
RCH5100
Brand: rough country Pages: 4
Volvo S40 2001 Owner'S Manual preview
S40 2001
Brand: Volvo Pages: 197
Rhino-Rack RBC044 Installation Instructions preview
RBC044
Brand: Rhino-Rack Pages: 5
Waeco PerfectView CRT300 Installation And Operating Manual preview
PerfectView CRT300
Brand: Waeco Pages: 200
Subaru Forester 2.5X 2003 Technicians Reference Booklet preview
Forester 2.5X 2003
Brand: Subaru Pages: 44
Toyota 2001 MR2 Spyder Owner'S Manual preview
2001 MR2 Spyder
Brand: Toyota Pages: 234
FORM FIT HD 8D 11 Manual preview
HD 8D 11
Brand: FORM FIT Pages: 2

Brands by name

Popular brands

Load more brands