manualshive.com logo in svg

Mercury Sable 2000, Owner'S Manual

The Mercury Sable 2000 Owner's Manual is a comprehensive guide that provides vital information, specifications, and maintenance instructions for this iconic vehicle. Experience hassle-free and convenient access to this essential manual by easily downloading it for free from our website. Unlock the secrets of your Mercury Sable 2000 today!

Share
Download
background image

reinstall it securely. The

indicator should turn off after three

driving cycles with the fuel filler cap properly installed. A driving cycle
consists of a cold engine start-up followed by mixed city/highway driving.

If you must replace the fuel filler cap, replace it with a fuel filler
cap that is designed for your vehicle. The customer warranty may
be void for any damage to the fuel tank or fuel system if the
correct genuine Ford or Motorcraft fuel filler cap is not used.

The fuel system may be under pressure. If the fuel filler cap is
venting vapor or if you hear a hissing sound, wait until it stops

before completely removing the fuel filler cap. Otherwise, fuel may
spray out and injure you or others.

If you do not use the proper fuel filler cap, excessive pressure or
vacuum in the fuel tank may damage the fuel system or cause

the fuel system to work improperly in a collision, which may result in
possible personal injury.

Choosing the right fuel

Use only UNLEADED FUEL. The use of leaded fuel is prohibited by law
and could damage your vehicle.

Do not use fuel containing methanol. It can damage critical fuel system
components.

Your vehicle was not designed to use fuel or fuel additives with metallic
compounds, including manganese-based compounds containing MMT.

Repairs to correct the effects of using a fuel for which your vehicle was
not designed may not be covered by your warranty.

Octane recommendations

Your vehicle is designed to use
“Regular” unleaded gasoline with an
(R+M)/2 octane rating of 87. We do
not recommend the use of gasolines
labeled as “Regular” that are sold
with octane ratings of 86 or lower in high altitude areas.

Do not be concerned if your engine sometimes knocks lightly. However, if
it knocks heavily under most driving conditions while you are using fuel

87

(R+M)/2 METHOD

Maintenance and care

180

Summary of Contents for Sable 2000









































































































































































































































Reviews:

No comments

Related manuals for Sable 2000

Saab 99 Important Operatlng, Safety And Maintenance Instructions preview
99
Brand: Saab Pages: 75
Gardigo MARTEN-FREE CAR Instruction Manual preview
MARTEN-FREE CAR
Brand: Gardigo Pages: 36
Victory 4x4 UNI-UPRS Install Instructions Manual preview
UNI-UPRS
Brand: Victory 4x4 Pages: 13
Renault ALASKAN 2017 Driver'S Handbook Manual preview
ALASKAN 2017
Brand: Renault Pages: 340
PUTCO Molle Panels Assembly And Instruction Manual preview
Molle Panels
Brand: PUTCO Pages: 2
PUTCO 1951 Series Instruction Manual preview
1951 Series
Brand: PUTCO Pages: 3
Aries 2051182 Installation Manual preview
2051182
Brand: Aries Pages: 3
Belkin F8J034 User Manual preview
F8J034
Brand: Belkin Pages: 30
Mitsubishi FTO Series Handbook preview
FTO Series
Brand: Mitsubishi Pages: 141
Hama MagLock Vent Operating Instructions Manual preview
MagLock Vent
Brand: Hama Pages: 39
Honda 2001 Accord Sedan Owner'S Manual preview
2001 Accord Sedan
Brand: Honda Pages: 372
Imiola HAK-POL F/005 Fitting Instruction preview
F/005
Brand: Imiola HAK-POL Pages: 3
Menabo 171071 Fitting Instructions preview
171071
Brand: Menabo Pages: 4
Harbor Freight Tools 95058 Installation And Operation Instructions Manual preview
95058
Brand: Harbor Freight Tools Pages: 8
Saleen 10-8002-C12167A Installation Manual preview
10-8002-C12167A
Brand: Saleen Pages: 6
Hellwig R-7694 Installation Instructions preview
R-7694
Brand: Hellwig Pages: 5
NavLinkz RL4-LR16-10 Manual preview
RL4-LR16-10
Brand: NavLinkz Pages: 26
Falcon FN-WCCS-W User Manual preview
FN-WCCS-W
Brand: Falcon Pages: 36

Brands by name

Popular brands

Load more brands