Mercury Pinpoint GPS Manual Download Page 6

6. We reserve the right to improve the design of any trolling motor or

accessory without assuming any obligation to modify any trolling motor or

accessory previously manufactured.

7. This warranty will not apply to: 1) haul‑out, launch, towing and storage,

transportation charges and/or travel time, telephone or rental charges of

any type, inconvenience, or loss of time or income, or other consequential

damages; or 2) removal or replacement of boat partitions or material

because of boat design for necessary access to the Product; or 3)

disconnection and reconnection of hard‑wired trolling motors.

8. TERMINATION OF COVERAGE: Warranty coverage may be terminated

for repossessed product, or product purchased at auction, from a salvage

yard, from a liquidator, from an insurance company, from unauthorized

marine dealers or boatbuilders, or other third party entities.

9. ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARE EXCLUDED

FROM THIS WARRANTY, WARRANTIES OF MERCHANTABILITY AND

FITNESS ARE EXCLUDED FROM THIS WARRANTY, IMPLIED

WARRANTIES ARE LIMITED TO THE LIFE OF THIS WARRANTY.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN

IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE

LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS

WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY

ALSO HAVE OTHER LEGAL RIGHTS WHICH MAY VARY FROM

STATE TO STATE.

For your records:

Model number _______________________________
Serial number _______________________________

WARRANTY INFORMATION

  

2

eng

Summary of Contents for Pinpoint GPS

































Reviews: