Mercury Pinpoint GPS, Manual, Page: 26 / 32

IMPORTANT: If the trolling motor loses the GPS signal while in any GPS
mode, the trolling motor will emit an error tone and automatically return to
manual mode.
When recalling a stored route, the trolling motor will navigate to the nearest
point on the route, then travel to the most distant end from the boat's current
position. At any time while traveling along a stored route, the direction of travel
can be reversed by recalling the stored route again. Once you have reached
the end of a stored route, the trolling motor will set anchor in the anchor mode
and will emit an ascending chirp to indicate that the boat has arrived at the end
of the stored route.
USING CRUISE CONTROL
Cruise control can be activated while in heading lock mode or route playback
mode to maintain a constant trolling speed. It will automatically adjust the motor
speed to correct for current and wind conditions to maintain a constant speed.
!
WARNING
Avoid serious injury from colliding with other boats, running aground, or
striking objects in the water. The Pinpoint GPS system cannot detect other
boats, shallow water, or objects in the water. Always beware of possible
obstructions to navigation when operating in any Pinpoint GPS mode.
a - Increase speed (+)
b - Cruise control
c - Decrease speed (–)
Setting Cruise Control
While in heading lock mode or route recall mode, you can set the cruise control
by pressing the
cruise control
button. The trolling motor will emit one
ascending chirp to indicate that the cruise control has been activated. The
system will automatically set a trolling speed of 1.0 mph (1.6 kph) and will
compensate for current and wind conditions to maintain this speed. Pressing
the
cruise control
button again will turn the cruise control off, indicated by a
descending chirp from the trolling motor.
53023
a
b
c
PRODUCT INSTALLATION AND OPERATION
22
eng