12. Ensure that no wires are pinched between the side panels and the trolling
motor. Tighten the side panel mounting screws.
a -
Side panel screws
b -
Locating tab
LINKING THE HANDHELD REMOTE TO THE TROLLING MOTOR
The first time the trolling motor is powered up, the handheld remote will need to
be linked to the trolling motor. The linking procedure is listed as follows:
1. Starting with the positive (+) lead, connect the trolling motor power cables
to the battery.
2. Within ten seconds after connecting the power cables, press the
left
arrow
button and
right arrow
button on the handheld remote at the same
time. The trolling motor will emit a low tune to confirm that the handheld
remote has been linked to the trolling motor.
a -
Left arrow button
b -
Propeller button
c -
Right arrow button
a
a
b
54454
a
54153
c
b
PRODUCT INSTALLATION AND OPERATION
eng
9
Summary of Contents for Pinpoint GPS
Page 4: ...eng iv...