Adjusting Motor Speed
If heading lock mode is selected from manual mode, the trolling motor will run
at the last selected speed. The motor speed can be manually adjusted in
heading lock mode by pressing the
increase speed (+)
button or
decrease
speed (–)
button. The trolling motor will emit two beeps when the user tries to
exceed the available motor speed limits.
Adjusting the Heading
While in heading lock mode, the heading can be adjusted by pressing the
left
turn
or
right turn
buttons on the handheld remote. The trolling motor will
resume heading lock navigation based on the new trolling motor heading.
OPERATING IN ROUTE MODE
Route mode has the ability to store and recall user‑defined routes. These
routes can be recorded and recalled by the user from any operating mode.
!
WARNING
Avoid serious injury from colliding with other boats, running aground, or
striking objects in the water. The Pinpoint GPS system cannot detect other
boats, shallow water, or objects in the water. Always beware of possible
obstructions to navigation when operating in any Pinpoint GPS mode.
a -
Memory buttons (1–8)
b -
Route playback
c -
Route record
Storing and Overwriting a Route
A route can be stored from any mode by pressing the
route record
button. The
trolling motor will emit a tune when the
route record
button is pressed. Once
the
route record
button is pressed, begin navigating along your desired
course. You can switch between manual mode and heading lock mode at any
time while recording a route. The trolling motor will emit one beep (and the
GPS status indicator light will blink) for every 2 m (6.5 ft) traveled while
recording. Press and hold any of the numbered
memory
buttons to stop
recording and store the route to the selected
memory
button. The trolling motor
will emit a tune to confirm that it has stored the route. The trolling motor can
store up to eight routes, each up to 6.4 km (4 miles) in length.
53021
c
b
a
PRODUCT INSTALLATION AND OPERATION
20
eng
Summary of Contents for Pinpoint GPS
Page 4: ...eng iv...