Route the male GPS connector through the slot, and connect it to
the female GPS connector by aligning the pins and locating tabs in
the connectors. Press the connectors together, then turn the nut 1/4
turn to the right until it locks.
Gently press the lower GPS module into the opening until it is fully
seated.
Remove the plastic plug, and route the GPS cable through the
opening in the trolling motor base.
a -
Status light indicator panel
b -
Status light harness
c -
NMEA cable
d -
Female GPS connector
e -
Male GPS connector
f -
Lower GPS module
g -
GPS cable
a
b
f
g
53470
d
c
e
PRODUCT INSTALLATION AND OPERATION
eng
7
Summary of Contents for Pinpoint GPS
Page 4: ...eng iv...