Mercury 92-813054A2, Manual

Page: 63 / 97

Section 5 - Maintenance
90-8M0069748
eng
APRIL 2012 Page 55
3. If the coolant is low in the coolant expansion tank, add the specified coolant as necessary to bring the level to within 25 mm
(1 in.) of the bottom of the fill neck.
Engine coolant fill location
(engine cover removed)
a - Pressure cap
b - Coolant expansion tank
c - Bottom of fill neck
Description Where Used Part Number
Marine Engine Coolant
Closed cooling system
92‑813054A2
Europe Only
Fleetguard Compleat with DCA4 Fleetguard Part Number: CC2825
Obtain Locally
IMPORTANT: When installing the pressure cap, be sure to tighten it securely to prevent coolant loss.
4. Install the pressure cap. Tighten securely.
Changing
Change (replace) the engine coolant at the prescribed interval. See
Replacing the Engine Coolant in the Closed Cooling
System
.
Air Filter
Removal
1. Loosen the clamp and remove the oil separator vent hose.
2. Loosen the clamp and remove the air filter housing from the turbocharger inlet.
Air filter housing installed on engine
a - Air filter housing
b - Oil separator vent hose
c - Air intake retaining clamp
a
b
c
25356
a
b
c
25357