Mercury 92-813054A2, Manual

Page: 52 / 97

Section 5 - Maintenance
Page 44 90-8M0069748
eng
APRIL 2012
3. Remove the dipstick and observe the oil level. The oil level must be between the marks on the dipstick. If necessary, add
oil. See
Filling
.
Engine oil level markings
a - Dipstick
b - Minimum operating level
c - Full mark and maximum operating level
4. Install engine oil dipstick
Filling
IMPORTANT: Do not overfill the engine with oil.
1. Remove the oil fill cap.
QSD 2.0L engine oil service
a - Engine cover with access panel removed
b - Engine oil fill cap
c - Engine oil dipstick
2. Add the specified oil to bring the oil level up to, but not over, the maximum mark on the dipstick.
a - Coolant oil cooler
b - Seawater oil cooler
Engine Coolant Oil Cooler
QSD 2.0 System Capacity Fluid Type Part Number
Engine oil (with filter) 5.85 L (6.20 US qt) 15W40 4‑cycle Diesel Engine Oil 92‑877695K1
Engine Seawater Oil Cooler
QSD 2.0 System Capacity Fluid Type Part Number
Engine oil (with filter) 6.00 L (6.30 US qt) 15W40 4‑cycle Diesel Engine Oil 92‑877695K1
14624
a
b
c
a
b
c
27986
33988
a
b