Mercury 2006 Mariner Owner'S Manual Download Page 17

Page: 17 / 281

With message center

Displays which door, liftgate or
liftgate glass is open.

Turn signal:

Illuminates when the

left or right turn signal or the
hazard lights are turned on. If the
indicators stay on or flash faster, check for a burned out bulb.

High beams:

Illuminates when the

high beam headlamps are turned on.

Key-in-ignition warning chime:

Sounds when the key is left in the

ignition in the OFF/LOCK or ACCESSORY position and the driver’s door
is opened.

Headlamps on warning chime:

Sounds when the headlamps or parking

lamps are on, the ignition is off (the key is not in the ignition) and the
driver’s door is opened.

Turn signal warning chime:

Sounds when the turn signal lever has

been activated to signal a turn and not turned off after the vehicle is
driven more than 2 miles (3.3 km).

GAUGES

2006 Mariner (mrn)
Owners Guide (post-2002-fmt)
USA (fus)

Instrument Cluster

Summary of Contents for 2006 Mariner


























































































































































































































































































Search results

Summary of Contents for 2006 Mariner

Reviews:

Related manuals for 2006 Mariner

Brands by name

Popular brands

Mercury 2006 Mariner, Owner'S Manual

Search results

Summary of Contents for 2006 Mariner

Reviews:

Related manuals for 2006 Mariner

Brands by name

Popular brands