Mercury 2006 Mariner Owner'S Manual Download Page 70 | Manualshive

Page: 70 / 281

background image

Relock

This feature will also automatically relock all the doors when:

•

the ignition is in the 3 (RUN) position and any door is opened then
closed, and

•

you put the vehicle in motion by releasing the brake pedal.

Deactivating/activating the autolock feature

The autolock feature can be turned on or off using the following
procedure.

Before starting, make sure the ignition is in the 1 (LOCK) position and
all vehicle doors are closed.

You must complete Steps 1-5 within 30 seconds or the procedure will
have to be repeated.

1. Turn the ignition to the 3 (RUN) position.

2. Press the power door unlock control (on the door panel) three times.

3. Turn the ignition from the 3 (RUN) position to the 1 (LOCK) position.

4. Press the power door unlock control three times.

5. Turn the ignition from the 1 (LOCK) position to the 3 (RUN) position.

6. The horn will chirp once to confirm programming mode is
entered/active.

7. Press the power door unlock control on the door panel one time.

8. Press the power door lock control on the door panel one time.

Note:

The horn will chirp once to confirm the feature is OFF, or the horn will
chirp and then honk to confirm the feature is ON.

9. Turn the ignition to the 1 (LOCK) position.

Note:

The horn will chirp

once to confirm the programming mode has been exited.

Repeat the previous procedure to turn the feature on or off.

Smart unlocking feature

The smart unlocking feature helps prevent you from locking yourself out
of the vehicle. With the key in any ignition position, the driver’s door will
automatically unlock if it is locked using the power lock control on the
driver’s door panel while the driver’s door is open.

2006 Mariner (mrn)
Owners Guide (post-2002-fmt)
USA (fus)

Locks and Security

69

«
...
68
69
70
71
72
...
»

Summary of Contents for 2006 Mariner


























































































































































































































































































Reviews:

No comments

Related manuals for 2006 Mariner

Brand: Saab Pages: 75

Brand: LaserTrack Pages: 12

Brand: Daihatsu Pages: 43

Brand: Jeep Pages: 25

Brand: Porsche Pages: 192

2012 Escalade Hybrid

Brand: Cadillac Pages: 90

Brand: Ultra-tow Pages: 14

Brand: Mercedes-Benz Pages: 121

Brand: Menabo Pages: 8

Brand: Camtree Pages: 5

Brand: Mazda Pages: 122

Brand: Parkeon Pages: 43

Brand: WABCO Pages: 52

Brand: Draw tite Pages: 4

Brand: EFILive Pages: 25

Brand: INDIWORK Pages: 18

Brand: Opel Pages: 103

Brand: FORM FIT Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands