Mercury 2006 Mariner Owner'S Manual Download Page 44

Page: 44 / 281

MULTI-FUNCTION LEVER

Windshield wiper:

For intermittent

operation, move control down one
position.

Adjust the rotary control to the
desired speed setting.

For normal or low speed wiper
operation, move control down two
positions from OFF.

For high speed wiper operation,
move control down three positions
from OFF.

Mist function:

To activate mist,

push control up from the OFF
position and release to get one wipe.

Windshield washer:

To activate

the windshield washer, pull control
toward you. Release control to stop
washer fluid spray.

2006 Mariner (mrn)
Owners Guide (post-2002-fmt)
USA (fus)

Driver Controls

Summary of Contents for 2006 Mariner


























































































































































































































































































Search results

Summary of Contents for 2006 Mariner

Reviews:

Related manuals for 2006 Mariner

Brands by name

Popular brands

Mercury 2006 Mariner, Owner'S Manual

Search results

Summary of Contents for 2006 Mariner

Reviews:

Related manuals for 2006 Mariner

Brands by name

Popular brands