Mercury 2006 Mariner Owner'S Manual Download Page 45

Page: 45 / 281

Rear window wiper/washer controls

For intermittent operation of rear
wiper, rotate end of control upward
to the

position.

For normal speed rear wiper
operation, rotate control upward to
ON.

To activate the rear washer, rotate
the control to the

position and

release.

TILT STEERING WHEEL

To adjust the steering wheel:

1. Pull down the steering column tilt
lever.

2. Move the steering wheel up or
down until you find the desired
location.

3. Push the steering column tilt
lever up. This will lock the steering
wheel in position.

Never adjust the steering wheel when the vehicle is moving.

2006 Mariner (mrn)
Owners Guide (post-2002-fmt)
USA (fus)

Driver Controls

Summary of Contents for 2006 Mariner


























































































































































































































































































Search results

Summary of Contents for 2006 Mariner

Reviews:

Related manuals for 2006 Mariner

Brands by name

Popular brands

Mercury 2006 Mariner, Owner'S Manual

Search results

Summary of Contents for 2006 Mariner

Reviews:

Related manuals for 2006 Mariner

Brands by name

Popular brands