Mercury 2004 Mountaineer Owner'S Manual Download Page 159 | Manualshive

Page: 159 / 280

background image

faster, because as in other vehicles, braking occurs at all four wheels. Do
not become overconfident as to road conditions.

Make sure you allow sufficient distance between you and other vehicles
for stopping. Drive slower than usual and consider using one of the lower
gears. In emergency stopping situations, apply the brake steadily. Since
your vehicle is equipped with a four wheel anti-lock brake system (ABS),
do not “pump” the brakes. Refer to the

Brakes

section of this chapter

for additional information on the operation of the anti-lock brake system.

Never drive with chains on the front tires of AWD vehicles without also
putting them on the rear tires. This could cause the rear to slide and
swing around during braking.

Tires, Replacement Requirements

Do not use a size and type of tire and wheel other than that
originally provided by Ford Motor Company because it can affect

the safety and performance of your vehicle, which could result in an
increased risk of loss of vehicle control, vehicle rollover and/or serious
personal injury or death.

Your vehicle is equipped with tires designed to provide for safe ride and
handling capability.

Make sure all tires and wheels on the vehicle are of the same size, type,
tread design and load-carrying capacity. If you have questions regarding
tire replacement, see an authorized Ford or Lincoln Mercury dealer.

If you nevertheless decide to equip your AWD for off-road use with tires
larger than what Ford Motor Company recommends, you should not use
these tires for highway driving.

If you use any tire/wheel combination not recommended by Ford Motor
Company, it may adversely affect vehicle handling and could cause
steering, suspension, axle or transfer case failure as well as the increased
risk of loss of vehicle control.

Do not use “aftermarket lift kits” or other suspension modifications,
whether or not they are used with larger tires and wheels.

These “aftermarket lift kits” could adversely affect the vehicle’s handling
characteristics, which could lead to loss of vehicle control or rollover and
serious injury.

Tires can be damaged during off-road use. For your safety, tires that are
damaged should not be used for highway driving because they are more
likely to blow out or fail.

2004 Mountaineer

(mnt)

Owners Guide (post-2002-fmt)
USA English

(fus)

Driving

159

«
...
157
158
159
160
161
...
»

Summary of Contents for 2004 Mountaineer

























































































































































































































































































Reviews:

No comments

Related manuals for 2004 Mountaineer

Brand: Ford Pages: 2

Brand: Kolpin Outdoors Pages: 6

Brand: Schartec Pages: 2

Brand: B-Speech Pages: 24

Brand: Whispbar Pages: 15

Brand: Mercedes-Benz Pages: 368

RUDDER ANGLE INDICATOR

Brand: VDO Pages: 8

Brand: Chevrolet Pages: 372

OCTAVIA - TECHNICAL CHANGES 11-2009

Brand: Skoda Pages: 16

Brand: Scion Pages: 24

Brand: Ecco Pages: 24

Brand: Gator Pages: 6

Brand: F.lli Menabo Pages: 16

Brand: Ferve Pages: 28

Brand: Cadillac Pages: 529

Brand: Toro Pages: 16

Brand: Renault Pages: 198

Brand: HAKR Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands