Mercury 2004 Mountaineer Owner'S Manual Download Page 228 | Manualshive

Page: 228 / 280

background image

Note:

Automotive fluids are not interchangeable; do not use engine

coolant, antifreeze or windshield washer fluid outside of its specified
function and vehicle location.

Adding engine coolant

When adding coolant, make sure it is a 50/50 mixture of engine coolant
and distilled water. Add the mixture to the coolant reservoir,

when the

engine is cool

, until the appropriate fill level is obtained.

Do not add engine coolant when the engine is hot. Steam and
scalding liquids released from a hot cooling system can burn you

badly. Also, you can be burned if you spill coolant on hot engine parts.

Do not put engine coolant in the windshield washer fluid
container. If sprayed on the windshield, engine coolant could

make it difficult to see through the windshield.

•

Add Motorcraft Premium Gold Engine Coolant
(yellow-colored), VC-7–A (U.S., except CA and OR), VC-7–B
(CA and OR only), meeting Ford Specification
WSS-M97B51–A1.

Note:

Use of Motorcraft Cooling System Stop Leak Pellets, VC-6, may

darken the color of Motorcraft Premium Gold Engine Coolant from
yellow to golden tan.

•

Do not add/mix an orange-colored, extended life coolant such
as Motorcraft Speciality Orange Engine Coolant, VC-2 (US) or
CXC-209 (Canada), meeting Ford specification WSS-M97B44–D
with the factory-filled coolant.

Mixing Motorcraft Speciality Orange

Engine Coolant or any orange-colored extended life product with your
factory filled coolant can result in degraded corrosion protection.

•

A large amount of water without engine coolant may be added, in case
of emergency, to reach a vehicle service location. In this instance, the
cooling system must be drained and refilled with a 50/50 mixture of
engine coolant and distilled water as soon as possible. Water alone
(without engine coolant) can cause engine damage from corrosion,
overheating or freezing.

•

Do not use alcohol, methanol, brine or any engine coolants
mixed with alcohol or methanol antifreeze (coolant).

Alcohol

and other liquids can cause engine damage from overheating or
freezing.

REVIEW COPY:

2004 Explorer

(exp)

, Owners Guide (post-2002-fmt)

(own2002)

,

Market:

USA English

(fus)

Maintenance and Specifications

228

«
...
226
227
228
229
230
...
»

Summary of Contents for 2004 Mountaineer

























































































































































































































































































Reviews:

No comments

Related manuals for 2004 Mountaineer

Brand: Pivot Pages: 4

Brand: Yakima Pages: 8

Brand: Uebler Pages: 56

Brand: RAM Pages: 76

Brand: Advantech Pages: 59

Brand: Inbay Pages: 20

DELTA DL FIX 209FP

Brand: Menabo Pages: 8

Vehicle Asset Communicator

Brand: I.D. Systems Pages: 41

Brand: Caraudio-Systems Pages: 9

Brand: Navman Pages: 10

Brand: Macrom Pages: 10

IT FITS RBO1018

Brand: RBO Pages: 36

Brand: SSV Works Pages: 2

Brand: Subaru Pages: 399

Brand: RADICAL Pages: 4

Brand: Saab Pages: 64

Brand: XPENG Pages: 316

Brand: Comtronics Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands