Mercury 2004 Mountaineer Owner'S Manual Download Page 175

Page: 175 / 280

FUEL PUMP SHUT-OFF SWITCH

FUEL

RESET

The fuel pump shut-off switch is a device intended to stop the electric
fuel pump when your vehicle has been involved in a substantial jolt.

After a collision, if the engine cranks but does not start, the fuel pump
shut-off switch may have been activated.

The fuel pump shut-off switch is
located in the passenger’s foot well,
by the kick panel.

Use the following procedure to reset the fuel pump shut-off switch.

1. Turn the ignition to the OFF position.

2. Check the fuel system for leaks.

3. If no fuel leak is apparent, reset the fuel pump shut-off switch by
pushing in on the reset button.

4. Turn the ignition to the ON position. Pause for a few seconds and
return the key to the OFF position.

5. Make a further check for leaks in the fuel system.

REVIEW COPY:

2004 Explorer

(exp)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA English

(fus)

Roadside Emergencies

175

Summary of Contents for 2004 Mountaineer

























































































































































































































































































Search results

Summary of Contents for 2004 Mountaineer

Reviews:

Related manuals for 2004 Mountaineer

Brands by name

Popular brands

Mercury 2004 Mountaineer, Owner'S Manual

Search results

Summary of Contents for 2004 Mountaineer

Reviews:

Related manuals for 2004 Mountaineer

Brands by name

Popular brands