Mercury 2004 Mountaineer Owner'S Manual Download Page 113

Page: 113 / 280

Reasons given...

Consider...

“I’d rather be thrown clear”

Not a good idea.

People

who are

ejected

are 40 times more likely to DIE.

Safety

belts help prevent ejection, WE CAN’T
“PICK OUR CRASH”.

Do not sit on top of a buckled safety belt to avoid the Belt
Minder chime. Sitting on the safety belt will increase the risk of

injury in an accident. To disable (one-time) or deactivate the Belt
Minder feature please follow the directions stated below.

One time disable

Any time the safety belt is buckled and then unbuckled during an
ignition ON cycle, the BeltMinder will be disabled for that ignition cycle
only.

Deactivating/activating the BeltMinder feature

Before following the procedure, make sure that:

•

the parking brake is set

•

the gearshift is in P (Park)

•

the ignition switch is in the OFF position

•

all vehicle doors are closed

•

the driver’s safety belt is unbuckled

•

the parklamps/headlamps are in OFF position (If vehicle is equipped
with Autolamps, the Autolamps feature

MUST

be turned off.)

Read steps 1 - 9 thoroughly before proceeding with the
deactivation/activation programming procedure.

BeltMinder deactivation/activation procedure

To reduce the risk of injury, do not deactivate/activate the Belt
Minder feature while driving the vehicle.

1. Turn the ignition switch to the RUN (or ON) position. (DO NOT
START THE ENGINE)

2. Wait until the safety belt warning light turns off. (Approximately 1–2
minutes)

•

Steps 3–5 must be completed within 60 seconds or the procedure will
have to be repeated.

2004 Mountaineer

(mnt)

Owners Guide (post-2002-fmt)
USA English

(fus)

Seating and Safety Restraints

113

Summary of Contents for 2004 Mountaineer

























































































































































































































































































Search results

Summary of Contents for 2004 Mountaineer

Reviews:

Related manuals for 2004 Mountaineer

Brands by name

Popular brands

Mercury 2004 Mountaineer, Owner'S Manual

Search results

Summary of Contents for 2004 Mountaineer

Reviews:

Related manuals for 2004 Mountaineer

Brands by name

Popular brands